The ConnexRF AC3124 is an FHSS digital transceiver operating in the 2.402 to 2.478 GHz license-free band. It is specifically designed for high-volume OEMs to integrate into their systems, and provides highly reliable RF wireless data communication.

With an operating temperature range of -40 to +80° C, the modules can withstand the harsh conditions of both outdoor and factory applications. Each radio is individually calibrated to assure consistent performance, even at opposite ends of the temperature spectrum.
FHSS technology helps reject interference in RF-hostile areas, while AeroComm's proprietary protocol further ensures data security and integrity. All frequency hopping, synchronization and RF system data transmission/reception is performed by the AC3124.
The transceiver operates in a point-to-point or point-to-multipoint client/server architecture. One transceiver is configured as a server; there can be one or many client transceivers. An assortment of radios is available to suit the varying range and network configurations of stationary as well as portable applications.

Hardware & Software:
The AC3124 incorporates advanced proprietary technology to enable high data throughput, lower power consumption and increased cost efficiency in a small business-card-sized radio. Advanced algorithms allow multiple AC3124 transceivers to synchronize in a third the time of typical radios. Highly precise timing then keeps the radios in sync, resulting in higher bandwidth.
Additionally, AeroComm's large volume production supports highly integrated electronic solutions. Integrated TX and RX functions (vs. separate TX and RX circuits typically used) results in fewer components, higher reliability and reduced power consumption in a low-cost radio.

Certifications :
The AC3124 is approved in the US, Canada and Europe for portable, mobile and fixed/basestation applications. The AC3124 has met all safety and emissions requirements but requires separation from the end-user to adhere to safety standards.

Aerocomm

AC3124 Transceiver

AC4424 is a 2.4GHz FHSS digital transceiver that represents a breakthrough in industrial RF communication. Comprised of a complete, agency-certified radio and sophisticated RF232® protocol.

AC4424 simplifies the OEM's design effort and assures successful field operation. RF232 makes AC4424 a drop-in module and operates in point-to-point, point-to-multipoint or multipoint-to-multipoint architectures. AC4424 contains temperature-compensating hardware and software to adapt across the -40°C to +80°C industrial range. The technology senses ambient temperature and compensates each radio according to its unique temperature profile. As a result, radios operating near -40°C will maintain communication with radios operating near +80°C.

• Transparent protocol eases integration for fast time-to-market.
• FHSS for interference rejection, co-located systems, data integrity, high power outputs.
• Low power sleep mode with continuous synchronisation for battery-based applications.
• Flexible protocol enables a variety of configurations.
• Popular uses Fleet Telemetry, Signs & Electronic Displays, Factory Automation, Lighting & Irrigation.

Aerocomm

AC4424 Transceiver

AC5124 2.4 GHz Transceiver FHSS digital transceiver designed specifically for robust, highly reliable RF data communication. The module is fully assembled and ready to integrate.

No additional hardware or software engineering development is required. AC5124 transceivers operate in a point-to-point, point-to-multipoint or multipoint-to-multipoint architecture.
It provides asynchronous TTL-level serial interface for OEM host communications. Full-duplex RF throughput rates up to 170kbps with a range of up to 500 feet (91 m) indoors and miles line-of-sight. AC5124 contains temperature-compensating hardware and software to adapt across the -40°C to +80°C industrial range.
The technology senses ambient temperature and compensates each radio according to its unique temperature profile.
As a result, radios operating near -40°C will maintain communication with radios operating near +80°C.

Aerocomm

AC5124 Transceiver

Although the ARtem ComPoint Workgroup is shipped pre-configured as an Access Point, the ComPoint's architecture also allows it be used as an Access Client or Access Router via a firmware upload.

The ComPoint Workgroup is especially beneficial for companies or project-groups whose work-areas must be flexibly configurable based on project or situation requirements. Indeed, no matter what the work environment, the ComPoint Workgroup can be configured accordingly.
A further feature of the ComPoint Workgroup is the dual Ethernet ports for the direct connection of two client PCs. In order to minimise installation costs in the Access Point mode, additional Access Points can be connected together in a "daisy-chain" using the two on-board Ethernet ports.

Main Features:

• Wi-Fi compatible to the 802.11b standard
• 2 x wired interfaces (Ethernet 10BaseT)
• Wired Equivalent Privacy (WEP) with 64bit or 128bit and WEPplus encryption
• 802.1x authentication

Artem

Wireless LAN

AC4486 Low Power 868 MHz Transceiver: is a compact 868MHz transceiver that can replace miles of cable in harsh environments.

Using field-proven RF technology which needs no additional ETSI (Europe) licensing, OEMs with little or no previous RF experience can easily and quickly make existing systems wireless.
AC4486 series feature drop-in installation and a number of on-the-fly control commands, providing OEMs with a versatile interface.
It can be used as a direct wire replacement, requiring no special host software for communication.
All synchronisation, and RF system data transmission / reception is performed by the transceiver.

Aerocomm

AC4486 Transceiver

AC4868 High Power 868 MHz Transceiver: Designed to provide OEMs with license-free communications over long distances, AC4868 is the essential, affordable alternative product operating in the saturated 433 MHz band.

It is the only fully certified 868 MHz transceiver to deliver 250mW output power, ideal for highly industrial European applications where reliable data deployment is crucial.
AC4868 is competitively priced and supports a host of communication architectures: point-to-point, point-to-multipoint and peer-to-peer. Its dynamic serial firmware manages difficult over-the-air issues such as error detection, multipath concerns, link verification and interference.
AC4868 modules are socket-compatible with AeroComm's 900 MHz or 2.4 GHz transceivers, enabling OEMs to design once and subsequently interchange radios to accommodate new markets, regulations and environments.
Full CE approval allows use of the transceiver in both mobile and fixed installations without further licensing requirements.

• Fully ETSI and CE approved for Europe
• Seamless cable-to-transceiver replacement
• High 868 MHz data rate: 115.2 Kbps
• Small form factor: 1.65 x 1.9 inches
• Operates in -40°C to +80°C temperature range
• 250mW enables up to 15 km range

Aerocomm

AC4868 Transceiver